Selecting the right facial bed begins with understanding the space it will occupy. Proper measurements not only ensure comfort and functionality but also help maintain a professional flow in your treatment room. Whether you are setting up a new beauty studio or upgrading existing equipment, knowing how to accurately measure your space is essential.
Most professional facial beds range between 180–200 cm in length, 60–75 cm in width, and 60–90 cm in adjustable height. However, variations exist depending on the design—some models offer reclining backs, detachable armrests, or electric lift systems that require extra clearance. When measuring your room, you should account for both the bed dimensions and the movement space needed for practitioners and clients.
| Measurement | Typical Range | Additional Space Needed |
|---|---|---|
| Length | 180–200 cm | +30 cm for legroom |
| Width | 60–75 cm | +40 cm for technician movement |
| Height | 60–90 cm | +10 cm for adjustments |
A practical rule of thumb is to allow at least 1 meter of free space around each side of the bed to accommodate tools, stools, and movement without restriction.
Begin by drawing a simple floor plan of your spa or clinic room. Mark permanent fixtures such as sinks, cabinets, and doors. Next, identify the most suitable placement for the facial bed—ideally centered between your working stations and power outlets. This ensures easy access to devices, lighting, and client entry.
If your room has irregular corners or limited width, measure from wall to wall at multiple points. Even a few centimeters of variation can affect how comfortably you can maneuver around the bed during treatments.
Comfort for the therapist is as important as comfort for the client. A facial bed positioned too close to a wall or cabinet can cause poor posture and fatigue during long sessions. Allow at least 80–100 cm of working space on both sides of the bed.
If your treatments involve equipment such as steamers, magnifying lamps, or microdermabrasion machines, make sure each device has dedicated space and reachable power access. Planning this early helps you avoid rearranging furniture later.
Your workspace should integrate storage for towels, lotions, and disposable tools without clutter. Measure the distance between your facial bed and nearby trolleys or shelves. Ideally, keep them within arm’s reach (50–70 cm) but not obstructing legroom.
In multipurpose rooms, consider movable trolleys with lockable wheels. This allows flexibility when switching between facial, massage, or waxing treatments without reconfiguring your space.
Clients must be able to access the bed easily, especially in spa environments where relaxation and flow matter. Ensure there is a minimum of 80 cm of clearance at the foot and sides of the bed for entry and exit.
If your bed reclines or rotates, factor in its full extension angle. Some electric models may extend beyond 200 cm when flat, requiring extra length space to prevent bumping into walls or other furniture.
Modern facial beds often include electric height adjustment, heating pads, or hydraulic systems. Before installation, confirm the proximity of electrical outlets and check voltage compatibility. You may need to add cable channels or surge protection to maintain a clean and safe workspace.
When planning lighting, place adjustable LED lamps above the head section of the bed, not behind it. This prevents shadows and helps maintain precision during detailed facial treatments.
As your business grows, you may want to add a second bed or introduce new devices. When measuring your initial layout, reserve at least 20–30% of free space for future upgrades. An efficient floor plan can evolve with your service offerings without requiring costly renovations.
If you operate in a compact salon or home studio, choose a foldable or adjustable facial bed that can be stored vertically when not in use. Lightweight aluminum frames are ideal for mobile beauticians who perform on-site treatments.
For aesthetic harmony, select neutral colors and streamlined designs that visually expand the room. Proper lighting and mirrors also make smaller spaces appear larger and more inviting.
When selecting your facial bed, quality and ergonomic design should come first. YINGXIN offers a complete range of professional facial beds, adjustable spa chairs, and beauty equipment crafted for both comfort and durability. Their products feature stable structures, smooth lifting systems, and premium upholstery that elevate every treatment experience.
Partnering with a manufacturer like YINGXIN ensures you get customizable solutions tailored to your clinic’s exact space requirements and workflow.
Measuring your space before purchasing a facial bed is more than a technical task—it defines how smoothly your treatments will run and how comfortable both clients and practitioners will feel. Take time to plan your layout, consider movement zones, and invest in reliable equipment designed for professional environments. With accurate measurements and the right choice of facial bed, your beauty room will become a harmonious, efficient, and welcoming space for every client.
Mobile Phone:
Phone:
Contact Now