Choosing a facial bed is not just about “comfort features.” For clinics and salons that run multiple treatments per day, the right configuration affects client stability, practitioner posture, cleaning speed, and even how many services one room can support. Two options that buyers frequently debate are armrests and a face-cut hole. The best answer depends on your treatment mix, client profile, and workflow standards—but in most professional setups, both features are worth specifying, as long as they are designed correctly.
Armrests are often seen as “nice to have,” but their practical value shows up during longer sessions and services that require clients to stay still. When a client’s arms have nowhere to rest, shoulders naturally elevate or rotate forward. That posture increases fidgeting, neck tension, and complaints like numbness in the hands—especially on narrower beds. Arm support also reduces side-to-side shifting, which matters for precision services such as facial cleansing, skin analysis, brow work, or device-based treatments where alignment must be maintained.
Armrests also protect practitioner efficiency. Ergonomic risk factors such as awkward posture and repetitive motion are well recognized in service work, and musculoskeletal disorders are a major cause of lost-workday injuries in healthcare settings. While esthetic services differ from hospital work, the posture demands—leaning, reaching, sustained shoulder flexion—are similar enough that table setup becomes an injury-prevention decision, not just a comfort decision.
A practical spec to look for is wide-range adjustability, so the bed can switch between “arms relaxed” and “arms out of the way.” For example, YINGXIN’s 4-motor facial bed lists armrest adjustment from 0° to 180°, allowing you to open space for side access or fold arm support into a stable resting position.
A face-cut hole is mainly about prone positioning. If your services include back-body care, shoulder/neck work, body massage, or any treatment that places clients face-down for more than a few minutes, a face-cut hole or face cradle prevents forced neck rotation. YINGXIN also highlights this type of configuration as a way to support comfortable face-down positioning for certain treatments.
That said, not every facial-focused room needs a permanent face hole. A face hole can become a hygiene concern if it is not paired with a removable insert, properly fitted cushion, and a cleaning routine that covers seams and contact surfaces. For purely supine services, a high-quality headrest system can be enough. The most flexible approach is choosing a bed platform that supports either a face cradle system or a removable face-hole plug, so the room can expand into body services without replacing equipment.
A quick way to decide is to match features to your most frequent use cases:
| Your Main Use Case | Armrests | Face-Cut Hole / Face Support |
|---|---|---|
| Facial care, lashes, brows, skin device services | Recommended for client stillness and shoulder relaxation | Optional, unless you do any prone work |
| Body massage, back treatments, shoulder/neck care | Strongly recommended for comfort and side stability | Strongly recommended to avoid neck strain in prone positioning |
| High turnover rooms with strict hygiene routines | Recommended if upholstery is easy to disinfect | Recommended only with removable inserts and cleanable edges |
| Mixed services in one room | Strongly recommended due to posture variety | Recommended for versatility and upsell capacity |
Whether you choose armrests and a face-cut hole, professional buyers should confirm the bed’s adjustment range, stability, and capacity—because these determine if the “features” are actually usable.
On YINGXIN’s 4-motor model, the published working ranges include:
Height adjustment: 570–910 mm, helping practitioners set a neutral working height across different services and staff heights
Backrest adjustment: 0°–77° and footrest adjustment: 0°–85°, supporting multiple positioning styles
Max load capacity: 180 kg, which is important for client inclusivity and perceived safety
These are not cosmetic numbers. More range means fewer “workarounds” like stacking pillows, overreaching, or moving the client mid-service—small time losses that add up across the year.
From a manufacturer perspective, professional facilities usually care about repeatable quality and configuration control. YINGXIN supports common project requirements such as OEM/ODM, published production parameters like 35–50 days lead time, and a 2-year warranty on the referenced model—useful for standardizing multi-room builds or chain rollouts. YINGXIN also outlines accessory options like armrests, face cradle/cushion systems, protective covers, and workflow add-ons, which helps buyers lock a consistent specification across sites.
A facial bed should have armrests when comfort, stillness, and practitioner posture matter—which is most professional environments. A face-cut hole is recommended when you run any prone-position services or want the room to stay flexible for future treatment expansion. The key is not simply selecting the feature, but selecting a design with the adjustment range, stability, and cleanability to make the feature truly usable in daily operations.
For project specifications, room planning, and configuration matching across service menus, YINGXIN can provide a consistent facial bed solution and accessory set to fit your workflow and installation standards. Share your room size, service list, and target positioning needs, and a suitable configuration can be proposed with clear parameters for procurement and rollout.
Mobile Phone:
Phone:
Contact Now